Custom stainless fabrication · Greater Boston
Custom stainless for commercial kitchens, built and installed across Massachusetts.
Measured in your room. Welded in ours.
C&S is a stainless fabrication and maintenance shop working across Massachusetts and Rhode Island. Counters, sinks, dish tables, equipment stands, handrails and guardrails, drawn before they are cut and installed by the people who built them.
Send your drawing See the work
A plan set, a sketch on paper, or a photo from your phone.
Commercial kitchens · Food service · Architectural metal
Speed is a spec.
The shop everybody recommends took a large job in the spring and the floor is committed until it ships. Your counter is behind it. We are not built that way: one roof, the owner at the bench, and the drawing goes straight to the metal.
“Equipment delivered on the right date and with a fine finish”
Jose · Google review
The work
Eight pieces we built.
An architect, a contractor and the person who runs the kitchen look at the same photograph and ask three different questions. Pick yours and the captions change.
Showing the work read for an architect.
Had a good experience with this company, great quality and workers, everything was on time.
Jack ParkinsonGoogle review
I was very happy with the work done. Equipment delivered on the right date and with a fine finish.
JoseGoogle review
The standout features are its excellent water drainage, the beautiful polish quality, and the impressive weld strength.
Celso AlcazarGoogle review, custom dish table
Send a drawing, a sketch or a photo of the piece that failed.
Send a drawing (857) 389-1886
The shop
Everything happens under one roof.
C&S has been in operation since 2022. Cutting, forming, welding, grinding and polishing all happen here, done by the people who will carry the piece into your room.
Work starts on a screen. You see the assembly drawn, with dimensions taken in the room, and nothing is cut until the drawing is right. When the walls close, we measure a second time and correct it.
The person who answers the phone is the person at the bench. Nothing has to travel through an office to reach the metal.
What we build
Five kinds of work, one bench.
The shop
Not a van. A floor.
Fiber laser, press brake, welding bench and assembly, all under one roof. Every fabricator in Massachusetts shows the finished piece. Almost none of them show the room it was built in.
What can be checked
The second measure happens after the walls close, because a room in drywall is not the room that was on the plan set. The people who fabricate the piece are the people who carry it in and set it, so there is no separate install crew meeting your room for the first time on delivery day. Rating and count as shown on the profile in August 2026. See the five clips
Coverage
Greater Boston, and the rest of Massachusetts.
Greater Boston is everyday work. Past it, the whole of Massachusetts, from the Cape to the Berkshires, on scheduled work, plus Rhode Island.
Towns with a page of their own
- Boston, MA
- Cambridge, MA
- Quincy, MA
- Fall River, MA
- New Bedford, MA
- Brockton, MA
- Worcester, MA
- Providence, RI
All 70 towns we cover, by county
Suffolk County
- Boston, MA
- Chelsea, MA
- Revere, MA
- Winthrop, MA
Middlesex County
- Cambridge, MA
- Somerville, MA
- Newton, MA
- Waltham, MA
- Medford, MA
- Malden, MA
- Everett, MA
- Arlington, MA
- Woburn, MA
- Framingham, MA
- Marlborough, MA
- Lowell, MA
Norfolk County
- Quincy, MA
- Brookline, MA
- Milton, MA
- Braintree, MA
- Dedham, MA
- Needham, MA
- Weymouth, MA
- Randolph, MA
- Franklin, MA
Essex County
- Lynn, MA
- Salem, MA
- Peabody, MA
- Beverly, MA
- Danvers, MA
- Lawrence, MA
- Haverhill, MA
- Gloucester, MA
Bristol County
- Fall River, MA
- New Bedford, MA
- Taunton, MA
- Attleboro, MA
- Dartmouth, MA
- Somerset, MA
- Swansea, MA
Plymouth County
- Brockton, MA
- Hingham, MA
- Marshfield, MA
- Middleborough, MA
- Plymouth, MA
Worcester County
- Worcester, MA
- Shrewsbury, MA
- Westborough, MA
- Milford, MA
- Leominster, MA
- Fitchburg, MA
Barnstable County · Cape Cod
- Hyannis, MA
- Falmouth, MA
- Sandwich, MA
- Chatham, MA
- Provincetown, MA
Hampden County
- Springfield, MA
- Chicopee, MA
- Holyoke, MA
- Westfield, MA
Hampshire & Franklin
- Northampton, MA
- Amherst, MA
- Greenfield, MA
Berkshire County
- Pittsfield, MA
- North Adams, MA
- Great Barrington, MA
Rhode Island
- Providence, RI
- Warwick, RI
- Pawtucket, RI
- Newport, RI
Do not see your town? We work the whole of Massachusetts, plus Rhode Island for everyday jobs, and the rest of New England and New York on larger projects. See every town we cover
Questions we get
What should we know about your shop before hiring you?
Cutting, forming, welding and finishing all happen in our own shop, and the people who build the piece are the ones who carry it in and set it. Every job gets two field measures, one at the quote and one after the walls close. C&S has been in operation since 2022, and the Google Business Profile is public: 5.0 across 13 reviews, short enough to read before you call.
How fast is fast?
Call and ask what the bench looks like this week. We answer with a real week, not a marketing number, and we tell you when the answer is no.
Are there reviews we can read?
Our Google Business Profile carries a 5.0 rating across 13 reviews, and five of those thirteen bring up timing on their own. They are public. Read them before you call us.
Do you take small jobs?
Yes. A single piece, a single weld, a single stand. It gets the same drawing and the same finish as a full run.
What do you need to quote?
A plan set, a sketch on paper, or a photo of the piece that failed. PDF, DXF, DWG and phone photos all upload on the contact form.
Start a project
Send the drawing.
A plan set, a sketch on paper, or a photo of the piece that failed. Any of them is enough to start. PDF, DXF, DWG and photos from your phone all upload.